45mm Octagonal Ceramic Knife for Cloth or Leather Cutting Machine

Product Description

45mm Octagonal Ceramic Knife for Cloth or Leather Cutting Machine

Ceramic knives are machined from nanoscale "zirconia" material. The zirconia + alumina powder is pressed with a 300-ton weight and a mold is pressed into a knife blank, sintered at 2000 degrees Celsius, and then polished with diamond and then equipped with a handle to make a "ceramic knife". 

Ceramic blade features: high hardness, high density, high temperature resistance, high toughness, clean cutting surface, good wear resistance, good corrosion resistance, low friction coefficient, insulation, no static electricity, etc.
 
Ceramic blade applications: metallurgical industry, carton industry, paper industry, electronics industry, plastic industry, pharmaceutical industry, sheet metal industry, rubber industry, food industry leather industry, packaging industry, printing industry, woodworking industry, textile industry, etc.

Product Features

Ceramic blade features: high hardness, high density, high temperature resistance, high toughness, clean cutting surface, good wear resistance, good corrosion resistance, low friction coefficient, insulation, no static electricity, etc.

Ceramic blade applications: metallurgical industry, carton industry, paper industry, electronics industry, plastic industry, pharmaceutical industry, sheet metal industry, rubber industry, food industry leather industry, packaging industry, printing industry, woodworking industry, textile industry, etc.

Processing customization instructions: related information, please consult customer service!

Product Parameters

 

Zirconia Ceramic Performance Table
Property	Item	Data	Unit
Mechanical Characteristics	Color	Ivory	-
	Density	6.02	g/cm3
	Bending Strength	800	MPa
	Compressive trength	3000	MPa
	Elastic Modulus	200	GPa
	Fracture Toughness	8	MPa m1/2
	Weber Coefficient	15	m
	Vickers Hardness	1200	HV 0.5
Thermal Characterics	Coefficient of Line Thermal Expansion	10	10-6K-1
	Thermal Conductivity	3	W/mK
	Thermal Shock Resistance(Put in Water)	300	ΔT °C
	Max Working Temperature	1000	°C
Electrical Characteristics	Volume Resistance at 20°C	>1013	Ωcm
	Dielectric Strength	11×106	V/m
	Dielectric Constant	33	εr
	One MHZ Dielectric Loss Angle at 20°C	0.0016	tanδ
Chemical Characteristics	Nitric Acid (60%) 90°C	≒0.00	WT Loss mg/cm^2/day
	Sulphuric Acid (95%) 95°C	0.04
	Caustic Soda (30%) 80°C	0.08

 

Model	Specification (mm)
C01	45X8X0.5
C02	68*10*0.5
C03	68*10*1.0
C04	70*16.5*0.5
OEM	Different size can be customized.
Logo	UCUT or OEM brand
Packaging	One pieces per pack

UCUT Knives and Blades

Why Use UCUT Machine Knives?

UCUT is technically reliable with over 40 years of manufacturing experience in all types of industrial knives and blades. When you use UCUT knives and blades, you save money and worries about replacing them.
We are located in one of the largest production bases of Tungsten carbide products, we have a strong ability to access almost all quality steel and other materials available in the industry. UCUT manufactures all your knives and machines from the best quality steels procured from ISO 9001 certified mills and suppliers.
If you are looking for machine knives with extra longevity, less machine downtime, and fast turnaround time, UCUT is ready to help, we are super easy to work with!

What customized knives and blades does UCUT produce?
You can contact UCUT sales engineers and make your own customized order to meet the exact requirements you need.
We can customize to your individual needs of below criteria:

1. Grades of steel
   1. Carbide
   2. Ceramic
   3. High carbon steel
   4. Hardened tool steel
   5. High-speed steel
   6. Stainless steel steel
   7. More
2. Tooth designs
   1. Single/Double Bevel
   2. Perforated
   3. Serrated
   4. Zigzag
   5. Chisel
   6. EZ Open
   7. Many more
3. Coatings/Notch
   1. Carbide
   2. Titanium Nitrate
   3. More

What materials does UCUT make its knives and blades?
Basically, the most widely used material in UCUT knives and blades are:

1. Solid carbide & Carbide Inlaid (Precise cut, extra hardness and durability)
2. Ceramic (Precise thin cut, widely used in film& foil, fabric cutting applications)
3. Hardened tools steels (D2, A2, A8. S7, 1095, 1075, highly durable, moisture and abrasion resistant)
4. High-speed steels (M2 HSS, M4 HSS, ASP23, High levels of hardness, friction, and heat resistance)
5. Stainless steel grades (300 and 400 series, Stain and rust resistant, corrosion resistant, cost-effective)
6. High carbon steels (52100 steel, Extra hardness, corrosion and wear resistance)
7. CPM 10V/9V Cold/Hot steel (Stand for extreme cold and hot temperature, high impact, and stress, corrosion resistant)
8. Spring steel (High yield strength for high-stress cutting jobs)

UCUT makes knives and blades from a wide variety of different materials. We select the best material as per what blades you need to cut and the consideration of the heat, cold, and moisture in the cutting applications.

What coatings on the blades does UCUT provide?

UCUT can make your knives and blades with any of the below coatings:

1. Titanium Nitride Coating
2. Titanium Carbon Nitride
3. Electroless Nickle Plating
4. Hard Chrome

Inspection& Packaging

UCUT makes sure every pc of your knives and blades is packed in new and safe export packing so that no damages occur during transportation with different means to the point of destination.

Before shipping, all your knives and blades will have proper anti-rust treatment to ensure protection against damages during transportation and storage.

 

About UCUT

1. Are you manufacturer?
Yes, UCUT is machine knives manufacturer and we are ready to be your factory partner for all types of industrial knives and blades, regardless of industries and applications.
 

2. What does UCUT Mean?
"U" stands for "You" and for Uncompromising quality. "Cut" is what we specialize in. U Cut, We Care.
 

3. How long has UCUT been established?
UCUT was founded in 1984 by Mr. Tao Guilin, over the past 40 years, the company has gradually grown to be the leading manufacturer of machine knives and blades in the industry. Apart from conventional steel-made machine knives and blades, UCUT has quickly developed its own production lines of solid carbide knives and ceramic blades. We have been striving to increase our manufacturing capabilities and reduce costs so that you can get the best cut with the most competitive prices in the market.
 

4. What Does UCUT do?
UCUT has over 18000 square meter's production workshop, 136 experienced workers, and QC in house, we have the technical know-how to manufacture and supply every machine knife and blade you need, no matter what edge or coating or steel you need, we can get the cut you want.
 

5. How soon can UCUT deliver the machine knives?
UCUT can manufacture and deliver most of the standard and customize knives and blades in 2-3 weeks. We also accept urgent orders depending on the specs and materials availability.

 

6. How to work with UCUT?
Working with UCUT can be simply easy. You send us the drawings/sketches/ prints or just samples, our technical team can identify any knives and blades.
After quotation and order is confirmed, UCUT production team will ensure your orders are processed in all right hands and finished in a timely manner. We conduct 100% inspection on all knives and blades we manufacture, full quality inspection reports will be provided upon request.
UCUT can handle DAP&DDP shipping and delivery to your door as well.
In conclusion, You want it, we manufacture and deliver it, and you have it!

 

7. Where to find UCUT?
UCUT factory is based in China with two manufacturing bases in Ma'anshan (Anhui) and Meishan (Sichuan), You are welcome anytime to contact our sales to arrange a visiting tour of our factory and workshops online.