Rotary Cutter Blade Wood Profile Cutter Straight Blades Veneer Peeling Knives

Product Description

Product Description

Rotary Cutter Blade Woodworking Tools Straight Blades Veneer Peeling Knives
Application: Machine Knives for the Wood Working Industry. 

    UCUT Machine Knives support the wood industry with efficient blades and systems.For debarking, log peeling and slicing of veneer, in vertical and horizontal slicer machines and rotary lathes.

    UCUT Product Range: Veneer slicing knives, Pressure bars, Chipper and counter knives, Debarker knives, Rotary peeling knives, Veneer guillotine and clipper knives, Scoring knives, Cut off saw blades; planer knife , chipper knife , counter knife Chipper knives, Anvils, Flaker knives, OSB knives, Beater ledges, Knife holders, Hammers,  etc.

Product Features

The rotary cutter is part of a rotary cutter, which is used to process wood segments of a certain length and diameter into a continuous strip of veneer for the production of plywood, joinery tops and other wood-based panel veneers.

The rotary cutter is used to rotary cut wood segments into veneers. The general method of rotary cutting is: the left and right clamping shafts clamp both ends of the wood segment and drive them to rotate, and the blade of the rotary knife installed on the tool bed is parallel to the axis of the clamping shaft and feeds along its vertical direction, along the direction of the annual ring of the wood segment. Rotary cut out the veneer of equal thickness.

Regardless of whether it is rotary cutting at constant speed or rotary cutting at constant linear speed, in order to obtain a veneer of a certain thickness, the feed of the tool bed should remain unchanged for each turn of the chuck shaft, and its feed is equal to that of the veneer. nominal thickness. By changing this feed, veneers of different thicknesses can be obtained.
1. The distance between the two chucks of the rotary cutting machine determines the length of the rotary cutting wood segment, and thus also determines the width of the veneer strip. It has a maximum distance and a minimum distance. The length of the wood segment should not be greater than its maximum distance and not less than its minimum distance.
2. The height H of the center line of the chuck shaft from the machine bed determines the maximum diameter of the rotary wood segment

The rotary cutter industry classification belongs to the woodworking machinery blade industry, and the shape classification belongs to the long blade. It is also called a plywood blade. Due to the depletion of natural resources and the protection regulations of exporting countries, high-quality wood is decreasing year by year, and the proportion of difficult-to-cut wood in the logs used for plywood is increasing.

Knives made of this newly developed steel grade can be suitable for all kinds of trees at home and abroad, and can withstand all kinds of harsh conditions of use. Next, I will briefly introduce the rotary cutting blade for you, hoping to bring you a certain degree of help.
1. Wear resistance
2. Sufficient strength and toughness

Product Parameters

Popular size of Veneer Rotary Knives/Peeling Knives (mm)
Length	Width	Thickness	Inlay Size
1270	180	16	80+/-2mm
1397	197	16	100+/-2mm
1400	180	16	80+/-2mm
1500	180	16	80+/-2mm
1700	197	16	100+/-2mm
2750	180	18	80+/-2mm
2760	200	16	100+/-2mm
3300	220	16	100+/-2mm
4040	235	20	100+/-2mm
4200	220	16	100+/-2mm

We also offer customized  blades according to customer requirements.

 
 

UCUT Knives and Blades

Why Use UCUT Machine Knives?

UCUT is technically reliable with over 40 years of manufacturing experience in all types of industrial knives and blades. When you use UCUT knives and blades, you save money and worries about replacing them.
We are located in one of the largest production bases of Tungsten carbide products, we have a strong ability to access almost all quality steel and other materials available in the industry. UCUT manufactures all your knives and machines from the best quality steels procured from ISO 9001 certified mills and suppliers.
If you are looking for machine knives with extra longevity, less machine downtime, and fast turnaround time, UCUT is ready to help, we are super easy to work with!

What customized knives and blades does UCUT produce?
You can contact UCUT sales engineers and make your own customized order to meet the exact requirements you need.
We can customize to your individual needs of below criteria: 

1. Grades of steel
   1. Carbide
   2. Ceramic
   3. High carbon steel
   4. Hardened tool steel
   5. High-speed steel
   6. Stainless steel steel
   7. More
2. Tooth designs
   1. Single/Double Bevel
   2. Perforated
   3. Serrated
   4. Zigzag
   5. Chisel
   6. EZ Open
   7. Many more
3. Coatings/Notch
   1. Carbide
   2. Titanium Nitrate
   3. More

What materials does UCUT make its knives and blades?
Basically, the most widely used material in UCUT knives and blades are:

1. Solid carbide & Carbide Inlaid (Precise cut, extra hardness and durability)
2. Ceramic (Precise thin cut, widely used in film& foil, fabric cutting applications) 
3. Hardened tools steels (D2, A2, A8. S7, 1095, 1075, highly durable, moisture and abrasion resistant)
4. High-speed steels (M2 HSS, M4 HSS, ASP23, High levels of hardness, friction, and heat resistance)
5. Stainless steel grades (300 and 400 series, Stain and rust resistant, corrosion resistant, cost-effective) 
6. High carbon steels (52100 steel, Extra hardness, corrosion and wear resistance) 
7. CPM 10V/9V Cold/Hot steel (Stand for extreme cold and hot temperature, high impact, and stress, corrosion resistant)
8. Spring steel (High yield strength for high-stress cutting jobs)

UCUT makes knives and blades from a wide variety of different materials. We select the best material as per what blades you need to cut and the consideration of the heat, cold, and moisture in the cutting applications.

What coatings on the blades does UCUT provide?

UCUT can make your knives and blades with any of the below coatings:

1. Titanium Nitride Coating
2. Titanium Carbon Nitride
3. Electroless Nickle Plating 
4. Hard Chrome

Inspection& Packaging

UCUT makes sure evey pc of your knives and blades is packed in new and safe export packing so that no damages occur during transportation with different means to the point of destination. 

Before shipping, all your knives and blades will have proper anti-rust treatment to ensure protection against damages during transportation and storage. 

 

About UCUT

1. Are you manufacturer?
Yes, UCUT is machine knives manufacturer and we are ready to be your factory partner for all types of industrial knives and blades, regardless of industries and applications.
 

2. What does UCUT Mean?
"U" stands for "You" and for Uncompromising quality. "Cut" is what we specialize in. U Cut, We Care.
 

3. How long has UCUT been established?
UCUT was founded in 1984 by Mr. Tao Guilin, over the past 40 years, the company has gradually grown to be the leading manufacturer of machine knives and blades in the industry. Apart from conventional steel-made machine knives and blades, UCUT has quickly developed its own production lines of solid carbide knives and ceramic blades. We have been striving to increase our manufacturing capabilities and reduce costs so that you can get the best cut with the most competitive prices in the market.
 

4. What Does UCUT do?
UCUT has over 18000 square meter's production workshop, 136 experienced workers, and QC in house, we have the technical know-how to manufacture and supply every machine knife and blade you need, no matter what edge or coating or steel you need, we can get the cut you want.
 

5. How soon can UCUT deliver the machine knives?
UCUT can manufacture and deliver most of the standard and customize knives and blades in 2-3 weeks. We also accept urgent orders depending on the specs and materials availability.

 

6. How to work with UCUT?
Working with UCUT can be simply easy. You send us the drawings/sketches/ prints or just samples, our technical team can identify any knives and blades.
After quotation and order is confirmed, UCUT production team will ensure your orders are processed in all right hands and finished in a timely manner. We conduct 100% inspection on all knives and blades we manufacture, full quality inspection reports will be provided upon request.
UCUT can handle DAP&DDP shipping and delivery to your door as well.
In conclusion, You want it, we manufacture and deliver it, and you have it! 

 

7. Where to find UCUT?
UCUT factory is based in China with two manufacturing bases in Ma'anshan (Anhui) and Meishan (Sichuan), You are welcome anytime to contact our sales to arrange a visiting tour of our factory and workshops online.